GTO V8-6.0L VIN U (2005)
Front Door Weatherstrip: Service and Repair
Weatherstrip Replacement - Door Opening
Weatherstrip Replacement - Door Opening
Removal Procedure
1. Open the door.
2. Remove the door sill plate. Refer to Door Sill Plate Replacement (See: Interior Moulding / Trim/Scuff Plate/Service and Repair/Removal and
Replacement) in Interior Trim.
3. Remove the quarter panel trim. Refer to Trim Panel Replacement - Rear Quarter (See: Interior Moulding / Trim/Trim Panel/Service and Repair)
in Interior Trim.
4. Remove the center pillar upper trim. Refer to Trim Panel Replacement - Upper Center Pillar (See: Interior Moulding / Trim/Trim Panel/Service
and Repair) in Interior Trim.
5. Remove the windshield garnish molding. Refer to Garnish Molding Replacement - Windshield Pillar (See: Interior Moulding / Trim/Trim
Panel/Service and Repair/Garnish Molding Replacement - Windshield Pillar) in Interior Trim.
6. Remove the hinge pillar trim panel. Refer to Trim Replacement - Hinge Pillar (See: Interior Moulding / Trim/Trim Panel/Service and Repair/Trim
Replacement - Hinge Pillar) in Interior Trim.
7. Remove the door opening weather-strip (1) by pulling it off the pinch-weld flange.
Installation Procedure