GTO V8-6.0L VIN U (2005)
Trunk / Liftgate Weatherstrip: Service and Repair
Weatherstrip Replacement - Rear Compartment Opening
Removal Procedure
1. Open the rear compartment.
2. Remove the rear compartment sill plate. Refer to Trim Panel Replacement - Cargo Area Rear (See: Interior Moulding / Trim/Trim Panel/Service
and Repair/Trim Panel Replacement - Cargo Area Rear) in Interior Trim.
3. Grasp the rear compartment weather-strip (2).
4. Pull up on the weather-strip (2) to release the weather-strip from the pinch-weld flange.
5. Remove the rear compartment weather-strip (2) from the pinch-weld flange.
Installation Procedure