GTO V8-6.0L VIN U (2005)
1. Install the rear compartment weather-strip (2) to the pinch-weld flange.
2. Locate the color mark on the rear compartment weather-strip (2) to body centerline at the front of the rear compartment lid opening.
3. Engage the rear compartment weather-strip (2) onto the pinch-weld flange. Start at the top center (3) of the lid opening. Work toward the bottom
center.
Allow crowding of the weather-strip in each corner (1) to avoid short cutting of the corners.
Use a rubber mallet to ensure the full engagement of the rear compartment weather-strip to the pinch-weld flange.
4. Remove the rear compartment sill plate. Refer to Trim Panel Replacement - Cargo Area Rear (See: Interior Moulding / Trim/Trim Panel/Service
and Repair/Trim Panel Replacement - Cargo Area Rear) in Interior Trim.
5. Close the rear compartment.