GTO V8-6.0L VIN U (2005)
5. Install the brake rotor to the hub. If you are installing the old rotor, use the paint mark (2) for proper orientation of the rotor to the flange.
6. If you removed and installed the brake rotor as part of a brake system repair, measure the assembled lateral runout (LRO) of the brake rotor in
order to ensure optimum performance of the disc brakes.
7. If the brake rotor assembled LRO measurement exceeds the specification, adjust the LRO to the specification.
8. Install the brake caliper and the pads as an assembly.
9. Install the rear tire and wheel assembly.
10. Lower the vehicle.
11. Adjust the park brake.
12. If you installed new pads or a new rotor, burnish the pads and rotors.
