GTO V8-6.0L VIN U (2005)
Drive Belt Tensioner: Service and Repair
Drive Belt Tensioner Replacement - Accessory
Drive Belt Tensioner Replacement - Accessory
Removal Procedure
1. Remove the accessory drive belt.
2. Remove the accessory drive belt tensioner bolts.
3. Remove the accessory drive belt tensioner.
Installation Procedure
1. Install the accessory drive belt tensioner.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the accessory drive belt tensioner bolts.
Tighten the accessory drive belt tensioner bolts to 50 Nm (37 ft. lbs.) starting with the lower bolt first.
3. Install the accessory drive belt.