GTO V8-6.0L VIN U (2005)
4. Install the crankshaft oil deflector.
5. Install the crankshaft oil deflector nuts.
Tighten the crankshaft oil deflector nuts to 25 Nm (18 ft. lbs.).
6. Lubricate a NEW oil pump screen O-ring seal (406) with clean engine oil.
7. Install the NEW O-ring seal onto the oil pump screen.
Important: Push the oil pump screen tube completely into the oil pump prior to tightening the bolt. Do not allow the bolt to pull the tube into the
pump.
Align the oil pump screen brackets with the correct crankshaft bearing cap studs.
8. Install the oil pump screen and pick up tube assembly (407).
9. Install the oil pump screen bolt (405) and nut (404).
^
Tighten the oil pump screen bolt to 12 Nm (106 inch lbs.).
^
Tighten the oil pump screen nut to 25 Nm (18 ft. lbs.).
10. Install the engine oil pan.
11. Install the engine front cover.
