GTO V8-6.0L VIN U (2005)
Water Pump: Service and Repair
Water Pump Replacement
Removal Procedure
1. Caution: Refer to Battery Disconnect Caution in Service Precautions.
Disconnect the negative battery cable.
2. Remove the air cleaner assembly.
3. Loosen two intake duct clamps (3), then remove the duct.
4. Remove the accessory drive belt.
5. Drain the cooling system.
6. Disconnect the two heater hoses (1) and the inlet (2) and outlet (3) hoses from the water pump.
7. Remove the two bolts (1) from the drive belt tensioner (2).
