GTO V8-6.0L VIN U (2005)
diameter to the base of the windshield pillar.
6. Hold the dash panel assembly in position slightly above the glue track.
7. With the aid of an assistant, pass the main wiring harness (3) through the opening in the dash panel.
8. Install the dash panel outer opening cover (1) onto the dash panel assembly.
9. Affix the dash panel side insulator (3) over the cover and fold over the back of the panel as shown (4).
10. Lower the dash panel assembly (1), ensuring the flange seats correctly in the glue track.
IMPORTANT: Check to ensure that the section around the main wiring harness hole is correctly installed.
