GTO V8-6.0L VIN U (2005)
2. Install the connector (2) to the inflatable restraint I/P module (1).
3. Lock the connector (2) with the connector lock mechanism.
4. Install the I/P compartment.
5. Connect the battery negative cable.
6. Install the SIR fuse into the I/P fuse panel (1).
7. Use caution while reaching in and turn the ignition switch to the ON position.
8. The AIR BAG indicator will flash then turn OFF.
9. Perform the Vehicle Diagnostic System Check if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System
Check - Vehicle.