GTO V8-6.0L VIN U (2005)
Install the power steering gear outlet pipe and a NEW O-ring to the steering gear.
Tighten the flare nut to 36 Nm (27 ft. lbs.).
3. Install the 2 outlet pipes (10, 13) to the 2 power steering fluid cooler hoses. Install the 2 hose clamps (11, 12).
4. Install the outlet pipe to the power steering fluid reservoir inlet hose. Install the hose clamp (5).
5. Install the bolt (4) in order to retain the outlet pipe to the left frame.
Tighten the bolt to 6.5 Nm (57.5 inch lbs.).
6. Install the 2 clips (7, 9) and the 2 bolts (6, 8) to the 2 outlet pipes.
Tighten the 2 bolts to 6.5 Nm (57.5 inch lbs.).
7. Notice: Refer to Using Proper Power Steering Fluid Notice in Service Precautions.
Fill the power steering fluid reservoir.
8. Notice: Refer to Air in the Power Steering System Notice in Service Precautions.
Bleed the power steering system.
9. Install the engine protection shield.
