GTO V8-6.0L VIN U (2005)
Air Flow Meter/Sensor: Service and Repair
MASS AIR FLOW (MAF)/INTAKE AIR TEMPERATURE (IAT) SENSOR REPLACEMENT
REMOVAL PROCEDURE
IMPORTANT: Take care when handling the mass air flow (MAF) sensor. DO NOT dent, puncture, or otherwise damage the honeycell located at the
air inlet end of the MAF sensor. Do not touch the sensing elements or allow anything, including cleaning solvents and lubricants, to come in contact
with the elements. Use a small amount of a non-silicone based lubricant on the air duct only, to aid in installation. DO NOT drop or roughly handle the
MAF sensor.
1. Disconnect the MAF/intake air temperature (IAT) sensor (2) wiring harness connector.
2. Loosen the clamp on air duct adaptor closest to the air cleaner upper housing (2).
