GTO V8-6.0L VIN U (2005)
Fuel Line Coupler: Service and Repair
Quick Connect Fitting(S) Service (Plastic Collar)
QUICK CONNECT FITTING(S) SERVICE (PLASTIC COLLAR)
TOOLS REQUIRED
-
EN-46843 Tool Set, Quick Connect Fitting Release Tool
-
J 37088-A Tool Set, Fuel Line Quick Connect Separator
REMOVAL PROCEDURE
1. Before you service any fuel system connection, relieve the fuel system pressure Refer to the Fuel Pressure Relief Procedure.
2. Grasp both sides of the quick connect fitting and twist 1/4 turn in each direction in order to loosen any dirt.
3. Remove any dirt, dust, or other foreign material from the quick connect fitting with compressed air.
CAUTION: Wear safety glasses when using compressed air in order to prevent eye injury.
4. Squeeze the release tabs on the plastic retainer.
5. Pull the quick connect fuel fitting apart. Use a shop towel to catch any remaining fuel that may leak from the fuel line and the fitting.
INSTALLATION PROCEDURE
