GTO V8-6.0L VIN U (2005)
3. Remove the accelerator pedal mounting bolts (1).
4. Slide the APP sensor upwards, to disengage the sensor from the support bracket (3).
5. Remove the accelerator pedal (2).
INSTALLATION PROCEDURE
1. Install the accelerator pedal.
2. Slide the APP sensor downwards, to engage the sensor to the support bracket (3).
3. Install the accelerator pedal mounting bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Always use a torque wrench in order to obtain the proper torque.
Tighten the accelerator pedal mounting bolts to 10 N.m (7 lb ft).