GTO V8-6.0L VIN U (2005)
Seat Belt Buckle: Service and Repair
Front
SEAT BELT BUCKLE REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 8 in Restraint Systems.
CAUTION: Refer to SIR Caution in Service Precautions.
2. Remove the front seat.
3. Disconnect the seat belt buckle pretensioner connector (4) from the seat.
4. On the driver's seat, disconnect the seat belt buckle switch connector (3) from the seat.
5. Remove the wire ties securing the wiring harness to the underside of the seat.
6. Remove the bolt (2) and the seat belt buckle and pretensioner assembly (1).
IMPORTANT: The seat belt buckle and pretensioner assembly attaching bolt is captive to the assembly.
INSTALLATION PROCEDURE
1. Install the seat belt buckle and pretensioner assembly (1). Secure with the bolt (2).
CAUTION: Refer to SIR Inflator Module Handling and Storage Caution in Service Precautions.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: When installing the seat belt buckle and pretensioner assembly, ensure that the front locating pin is aligned with the seat frame.