GTO V8-6.0L VIN U (2005)
1. Install the seat belt buckle and pretensioner assembly (1). Secure with bolt (2).
CAUTION: Refer to SIR Inflator Module Handling and Storage Caution in Service Precautions.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: When installing the seat belt buckle and pretensioner assembly, ensure that the front locating pin is aligned with the seat frame.
Tighten the seat belt buckle and pretensioner assembly bolt to 42.5 N.m (31 lb ft).
2. Secure the wiring harness to the underside of the seat using wire ties.
3. On the driver's seat, Connect the seat belt buckle switch connector (3) to the seat.
4. Connect the seat belt buckle pretensioner connector (4) to the seat.
5. Install the front seat.
6. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 8.
Pretensioner Handling and Scrapping
PRETENSIONER HANDLING AND SCRAPPING
SCRAPPING PROCEDURE
During the course of a vehicle's useful life, certain situations may arise which will necessitate the disposal of a live (undeployed) pretensioner. The
following information covers the proper procedures for the disposing of a live pretensioner. Deploy the pretensioner before disposal. Do not dispose
of a live pretensioner through normal disposal channels.
CAUTION: In order to prevent accidental deployment of the pretensioner which could cause personal injury, do not dispose of an
undeployed pretensioner as normal shop waste. The undeployed pretensioner contains substances that could cause severe illness or personal
injury if the sealed container is damaged during disposal. Use the following deployment procedures to safely dispose of an undeployed
pretensioner. Failure to dispose of a pretensioner as instructed may be a violation of federal, state, or local laws.
Deployment Inside the Vehicle
DEPLOYMENT INSIDE THE VEHICLE
Refer to Inflator Module Handling and Scrapping Deployment Inside Vehicle (Vehicle Scrapping Procedure) for deploying the pretensioners inside the
vehicle.
Deployment of the Seat Belt Pretensioners
DEPLOYMENT OF THE SEAT BELT PRETENSIONERS
TOOLS REQUIRED
-
EL-46845 SIR Deployment Harness Adapter
-
J 38826 SIR Deployment Harness
Deploy the seat belt pretensioners outside of the vehicle when the vehicle will be returned to service. Situations that require deployment outside of the
