GTO V8-6.0L VIN U (2005)
Power Steering Fluid Reservoir: Service and Repair
Remote PS Fluid Reservoir Bracket Replacement
Remote PS Fluid Reservoir Bracket Replacement
Removal Procedure
1. Use a flat blade tool in order to release the tab on the bracket (10) that retains the power steering fluid reservoir (1). Lift the reservoir up and away
from the tab.
2. Move the reservoir to the side.
3. Remove the 2 bolts (9) that retain the bracket to the engine.
Installation Procedure
1. Notice:
Install the bracket (10) and the 2 bolts (9) to the engine.
Tighten the 2 bolts to 50 Nm (37 ft. lbs.).
2. Slide the power steering fluid reservoir (1) onto the bracket. Verify the tab on the bracket retains the reservoir.
