GTO V8-6.0L VIN U (2005)
4. Install the bolt (9) in order to retain the cooler to the body.
Tighten the bolt to 6.5 Nm (57.5 inch lbs.).
5. Install the 2 cooler hoses (11) to the 2 cooler pipes. Install the 2 hose clamps (10).
6. Install the 2 power steering gear outlet pipes to the 2 cooler hoses. Install the 2 hose clamps (1, 2).
7. Notice: Refer to Using Proper Power Steering Fluid Notice in Service Precautions.
Fill the power steering fluid reservoir.
8. Notice: Refer to Air in the Power Steering System Notice in Service Precautions.
Bleed the power steering system.