GTO V8-6.0L VIN U (2005)
Power Steering Pump: Service and Repair
Power Steering Pump Bracket Replacement
Power Steering Pump Bracket Replacement
Removal Procedure
1. Remove the power steering pump (1) from the mounting bracket (2).
2. Remove the 2 bolts (3,4) from the bracket.
3. Remove the bracket from the cylinder head.
Installation Procedure
1. Install the mounting bracket (2) to the cylinder head.
2. Notice:
Install the 2 bolts (3,4) to the bracket.
Tighten the 2 bolts to 28 Nm (21 ft. lbs.).
3. Install the power steering pump to the bracket.
