GTO V8-6.0L VIN U (2005)
3. Install a new case extension seal using a soft face hammer and J21426.
4. Install a new case extension O-ring (3).
5. Install the case extension (2).
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the case extension bolts (1).
Tighten the case extension bolts (1) to 45 Nm (33 ft. lbs.).
7. Install the propeller shaft.
8. Install the catalytic converter from the vehicle.
9. Install the catalytic converter support bracket.
10. Lower the vehicle.
11. Check the transmission fluid level.
