GTO V8-6.0L VIN U (2005)
5. Using a small screwdriver, pry the locking tab from the transmission control module (TCM) connector (2).
6. Release the connector from the TCM.
7. Remove the TCM from the mounting bracket.
Installation Procedure
1. Position the TCM in the mounting bracket.
2. Connect the TCM electrical connector to the TCM.
3. Install the locking tab onto the electrical connector.
4. Position TCM mounting bracket on the lower kick panel, then push the bracket upward to position the upper retainer in place.
5. Depress the mounting bracket at the bottom to secure the TCM in place.
6. Install the hinge pillar trim on the vehicle.
7. Connect the scan tool, then clear any TCM DTC's that may have set during the removal procedure.
