GTO V8-6.0L VIN U (2005)
1. Install the clutch master cylinder and gasket into the opening in front of the dash.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the clutch master cylinder retaining nuts (3).
Tighten the clutch master cylinder nuts (3) to 25 Nm (18 ft. lbs.).
3. Connect the hydraulic pipe to the clutch master cylinder.
Tighten the clutch master cylinder hydraulic pipe to 10 Nm (7 ft. lbs.).
4. Install the brake vacuum booster.
5. Install the clutch master cylinder fluid reservoir and bolt (1) to the brake master cylinder.
Tighten the bolt to 10 Nm (7 ft. lbs.).
6. Check the clutch hydraulic reservoir hose for twists or kinks.