GTO V8-6.0L VIN U (2005)
2. Important: During the installation process, apply a firm but constant to ease the boot over the lever attaching lug (1) to prevent damage to the
boot stitching.
Gradually slide the boot opening over the rounded section (2) of the lever assembly.
3. Continue to apply a constant pressure to the boot, sliding the boot over the lever end (1). Pull the boot down past the mounting flange.
4. Slide the boot into place over the groove in the gear shift lever.
5. Install a new retaining tie strap (1) around the boot 5 mm (0.20 inch) from the end of the boot and aligns with the groove in the shift lever.
6. Install the shift control assembly.
