GTO V8-6.0L VIN U (2005)
Transmission Mount: Service and Repair
Transmission Mount Replacement - Rear
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Support the transmission with a transmission jack.
3. Remove the retaining bolts (1, 2) from the exhaust bracket (3).
4. Important: This step must be done to maintain the correct powertrain alignment on reassembly or vehicle vibration and/or handling problems
may occur.
Scribe or mark around each of the transmission crossmember support mounting points to the vehicle underbody, to provide alignment reference
points for reassembly.