GTO V8-6.0L VIN U (2005)
Headlamp Washer Spray Nozzle: Service and Repair
WASHER NOZZLE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the windshield washer hose from the washer nozzle.
2. From the underside of the hood, squeeze the retaining tabs (1) on the base of the washer nozzle assembly, and push the nozzle out through the top
of the hood.
3. Remove the nozzle from the hood.
INSTALLATION PROCEDURE
1. Install the nozzle to the hood. Ensure that the retaining tabs (1) are fully engaged.
2. Reconnect the washer hose to the washer nozzle.