GTO V8-6.0L VIN U (2005)
1. Install the washer pump (4) to the washer solvent container (5).
2. Position the washer solvent filler neck (3) through the wheelhouse panel hole (1).
3. Install the washer solvent container screws (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 3 N.m (26 lb in).
4. Connect the washer pump hose (1) to the washer pump (4).
5. Connect the washer pump electrical connector (2) to the washer pump (4).
6. Fill the washer solvent container with washer solvent.
7. Install the right front tire and wheel, if removed.
8. Install the battery, if removed.