GTO V8-6.0L VIN U (2005)
2. Ensure the wiper motor linkages are in the parked position.
3. Install the wiper arm assembly (2) onto the drive spindle (1).
4. Hold the measuring device at a 90 degree angle to the wiper blade while maintaining the following distances:
-
Install the right arm so that the blade is positioned with the tip: 30-40 mm (1.18-1.57 in) (3) above the edge of the air inlet screen (4).
-
Install the left arm so that the blade is positioned with the tip: 30-40 mm (1.18-1.57 in) (3) above the edge of the air inlet screen (4).
5. Install the wiper arm nut (2) to the drive spindle (3).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the nut to 22 N.m (16 lb ft).
6. Install the wiper arm nut cover (1).
7. Lower the hood.
8. Operate the windshield wipers and inspect for proper operation.
