J2000/Sunbird V6-191 3.1L (1992)
Oil Pan: Service and Repair
1.
Disconnect battery ground cable.
2.
Remove serpentine belt and belt tensioner.
3.
Raise and support vehicle, then drain engine oil.
4.
Remove starter assembly, then remove outer plastic flywheel and starter shield.
5.
Remove inner metal flywheel shield.
6.
Remove engine to frame mount attaching nuts as outlined under ENGINE MOUNT.
7.
Lower vehicle and support engine using tool No. J 28467-A or equivalent.
8.
Raise and support vehicle, then remove inner fender splash shield.
9.
Remove oil pan attaching nuts and bolts, then remove oil pan.
10.
Reverse procedure to install. Torque attaching nuts and bolts to specifications.
