J2000/Sunbird V6-191 3.1L (1992)
Fig. 23 Pinion Bearing Assembly Removal
1.
Remove bearing retainer ring, Fig. 23.
2.
Using a drift or punch, gently tap on bearing until removed.
3.
To install, use a suitable socket and press on outer race of bearing until firmly seated.
4.
Install retaining ring.
Rack Bearings
Fig. 19 Rack Bearing Assembly
Removal
1.
Remove rack and pinion assembly from vehicle.
2.
Remove adjuster plug nut from adjuster plug, then adjuster plug from housing, Fig. 19.
3.
Remove adjuster spring and rack bearing with O- ring seal attached.