J2000/Sunbird V6-191 3.1L (1992)
Suspension Strut / Shock Absorber: Service and Repair
Shock Absorber Replace
Fig. 2 Rear Suspension Exploded View
1.
Open deck lid, then remove trim cover and shock absorber upper retaining nut.
2.
Raise rear of vehicle and support rear axle using a suitable jack.
3.
Remove shock absorber lower attaching bolt, then disconnect shock absorber from mounting bracket, Fig. 2. Remove shock absorber from
vehicle.
4.
Reverse procedure to install. Torque attaching bolt to specification.
