J2000/Sunbird V6-191 3.1L (1992)
Install spacer package, P/N 22111290, over driver side linkage housing as shown in Figure 1. Make sure spacer is correctly oriented.
Install new screws provided and torque evenly to 8 N-m (70 lbs.in.).
NOTE:
When reassembling cowl, make sure that washer hose is reconnected (and not pinched).
If an interference condition results between the wiper arm head casting and the cowl clearance hole, use a file to enlarge hole at interference point.
This procedure should not be used for 1993 vehicles, as a revised arm has been introduced which incorporates a revised blade angle.
Parts are currently available from GMSPO.
WARRANTY INFORMATION:
Labor operation Number: T4677
Labor Time: 0.4 hour
Trouble Code: 92