J2000/Sunbird V6-191 3.1L VIN T MFI (1994)
If the reprogramming is successful, the operator may hear the motors rehome and will see the following screens displayed on the TECH 1:
Press the "EXIT" key to complete the reprogramming process. If any other problems are encountered during reprogramming, the TECH 1 cartridge will
notify the user appropriately.
After reprogramming, clear codes using the 1988-1995 Chassis selection of the Tech 1 Mass Storage Cartridge.
WITH FOOT OFF BRAKE PEDAL, start the engine twice and allow it to run for at least 10 seconds each time. If any codes return (including 46 and
86), proceed to the vehicle's service manual, SECTION 5E1, for further diagnosis.
If there are any questions regarding the usage of this reprogramming procedure or diagnosis of the ABS Vi brake system, please contact Delco Chassis
Technical Assistance at 1-800-523-0203.
Warranty Information For vehicles repaired under warranty, use:
Labor Operation
Labor Time
H 2504
0.2 Hours
