pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Radiator Cooling Fan Motor Relay > < Part 1 of 2|Page 1896
Page 1
background image

Radiator Cooling Fan Motor: Service and Repair

1. Remove battery ground cable.
2. Remove air cleaner duct and assembly.
3. Mark latch position for reassembly, then remove primary latch.
4. Drain cooling system below upper radiator hose level.
5. Disconnect upper radiator hose at radiator.
6. On vehicles equipped with automatic transaxle, disconnect transaxle cooler lines at radiator.
7. On all models, disconnect electrical connector at cooling fan.
8. Remove fan assembly from radiator support.
9. Reverse procedure to install.

Radiator Cooling Fan Motor Relay > < Part 1 of 2|Page 1896