J2000/Sunbird V6-191 3.1L VIN T MFI (1994)
Valve Cover: Service and Repair
LEFT SIDE
1.
Disconnect battery ground cable and drain cooling system.
2.
Loosen bypass tube at intake, then remove rocker arm cover to air inlet attaching tube.
3.
Remove rocker arm cover attaching bolts, then remove rocker arm cover.
4.
Reverse procedure to install. Torque rocker arm cover attaching bolts to specifications.
RIGHT SIDE
1.
Disconnect battery ground cable.
2.
Remove brake booster vacuum line at bracket, then remove cable bracket at plenum.
3.
Remove vacuum line bracket at cable bracket, then remove lines at alternator bracket stud.
4.
Remove rear alternator attaching brace, then remove serpentine belt.
5.
Remove alternator attaching bolts and position alternator aside.
6.
Remove PCV valve, then remove rocker arm cover attaching bolts.
7.
Remove spark plug wires, then remove rocker arm cover assembly.
8.
Reverse procedure to install. Torque attaching bolts to specifications.
