J2000/Sunbird V6-191 3.1L VIN T MFI (1994)
5. Intake manifold.
Tighten
^
Intake manifold bolts in proper sequence.
6. Front valve cover.
7. Heater pipe to manifold.
8. Thermostat housing.
9. Upper radiator hose to thermostat housing.
10. Heater pipe to the cylinder heads, water pump and coolant pump.
11. Coolant bleed pipe on the thermostat housing.
12. Power steering pump.
13. Fuel lines.
14. Fuel lines at bracket.
15. Plenum.
16. Throttle body heater hoses.
17. Cables to throttle body.
18. PCV hose and any other vacuum lines.
19. Route and connect electrical connections.
^
T.P. sensor.
^
I.A.C.
^
E.G.R.
^
Engine Coolant Temperature (E.C.T.) Sensor.
^
Injector wiring harness connector,
20. Rear valve cover.
21. Route and connect all secondary ignition wires.
22. Generator.
23. Generator brace.
24. Power steering line to generator bracket.
25. Trottle cable and vacuum line bracket to the plenum.
26. Brake vacuum pipe to plenum.
27. Radiator surge tank.
28. EGR transfer tube to the exhaust manifold.
29. Exhaust crossover to exhaust manifolds.
30. Serpentine belt.
31. Air cleaner assembly.
32. Battery.
33. Negative battery cable.
34. Fill coolilig system.
35. Refer to "Idle Learn Procedure".
Inspect
^
Proper fluid levels.
^
Leaks.
^
Completion of repairs
