Lemans FWD L4-121 2.0L (1989)
Crankshaft Main Bearing Seal: Service and Repair
1.
Remove transaxle assembly as described under TRANSMISSIONS CLUTCHES DIFFERENTIALS AXLES AND DRIVE
SHAFTS/MANUAL TRANSAXLE/COMPONENT REPLACEMENT AND REPAIR PROCEDURES/TRANSAXLE.
2.
Remove flywheel attaching bolts and flywheel.
3.
On models with manual transaxle, remove pressure plate and clutch disc.
4.
On all models, pry crankshaft rear oil seal from engine.
5.
Reverse procedure to install. Prior to installation, lubricate seal lip with engine oil. Use tool No. J-36227 or equivalent, to install seal.
