pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

All Other Service Bulletins for Distributor Cap: > < Ignition - Startability/Performance When Cold or Damp
Page 1
background image

Distributor Cap: All Technical Service Bulletins
Ignition - Startability/Performance When Cold or Damp

Bulletin Number:

92-6-21

Reference Number:

136406

Publish Date:

2/92

Subject:

ENGINE STARTABILITY/PERFORMANCE WHEN 
COLD OR DAMP (NEW DISTRIBUTOR CAP FOR SERVICE)

Models
Affected:

1988-92 LEMANS MODELS

Recently a new distributor cap, P/N 10457153 was released for service, on 1988-92 LeMans models replacing P/N 10467543. The new cap has
aluminum terminals instead of zinc plated iron terminals, for increased durability. The aluminum terminals will provide increased terminal corrosion
protection and will result in better startability/performance in cold or damp weather conditions. Whenever a service diagnosis determines that the
distributor cap should be replaced, P/N 10457153 should be used.

Replacement of the distributor cap should be performed according to the LeMans Service Manual procedure.

Parts are expected to be available on February 17, 1992. In case of limited inventory, parts will be placed on 400 control to waive VIP surcharges. Only
verifiable emergency VIP orders will be accepted. SPO will make every effort to obtain parts. However, the part will be shipped premium transportation
at dealer's expense and all other order types will be placed on backorder until the 400 control is removed.

Labor Operation Number:

J4360

Labor Time:

0.6 Hour

All Other Service Bulletins for Distributor Cap: > < Ignition - Startability/Performance When Cold or Damp