pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

A/T - Intermittent TCC, MIL ON, and DTC 62/26 Set|Page 523 > < A/T - Intermittent TCC, MIL ON, and DTC 62/26 Set|Page 521
Page 1
background image

Transmission Position Switch/Sensor: Testing and Inspection

Chart C-1A

Wiring Diagram For P/N Switch

CIRCUIT DESCRIPTION:

The PARK/NEUTRAL Switch contacts are closed to ground in park or neutral and open in drive ranges. The ECM supplies ignition voltage through a
current limiting resistor to circuit 434, and senses a closed switch when the voltage on circuit 434 drops to less than one volt. The ECM uses the P/N
signal as one of the inputs to control idle air and spark timing.

A/T - Intermittent TCC, MIL ON, and DTC 62/26 Set|Page 523 > < A/T - Intermittent TCC, MIL ON, and DTC 62/26 Set|Page 521