Lemans FWD L4-121 2.0L (1989)
Fig. 8 Stabilizer Bar Attaching Nut Installation
1.
Raise vehicle and support so that front suspension hangs free.
2.
Remove front wheel and tire assemblies.
3.
Disconnect stabilizer bar link assemblies from control arms, Fig. 1.
4.
Remove stabilizer bar bracket attaching bolts, then the bushings, brackets and stabilizer bar.
5.
Reverse procedure to install. Tighten stabilizer bar to body bolts to torque listed under SPECIFICATIONS/MECHANICAL
SPECIFICATIONS/TIGHTENING SPECIFICATIONS, and the stabilizer bar to control arm nuts to a length of 15/32 inch, Fig. 8.
