Montana V6-3.4L VIN E (2002)
Map Pocket: Service and Repair
Shelf Carrier Replacement - Rear
REMOVAL PROCEDURE
1. Remove the screws from the hinged cover.
2. Remove the cover from the rear trim panel.
3. Release the tabs and pull out the trim panel.
INSTALLATION PROCEDURE
1. Install the trim panel and press firmly into the tabs.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Align the cover and fasten the screws.
Tighten
Tighten the screws to 2.5 N.m (22 lb in).