Montana V6-3.4L VIN E (2002)
4.2.
Remove the brake drum.
5. Remove the park brake cable from the park brake actuator.
6. Use the J 37043 in order to remove the park brake cable.
^
For domestic vehicles, remove the park brake cable from the backing plate.
^
For export vehicles, remove the park brake cable from the park brake cable bracket.
Installation Procedure
1. Install the park brake cable.
^
For domestic vehicles, install the park brake cable to the backing plate.
^
For export vehicles, install the park brake cable to the park brake cable bracket.
2. Install the park brake cable to the park brake actuator.
3. For domestic vehicles, perform the following steps.
3.1.
Install the tire and wheel.
3.2.
Install the brake drum.
4. Install the park brake left side cable to the park brake equalizer.
5. Adjust the park brake cable.
6. Lower the vehicle.
Right Rear
Park Brake Cable Replacement - Right Rear
Removal Procedure