Montana V6-3.4L VIN E (2002)
21.
Remove the brake booster mounting nuts.
22.
Remove the 2 front engine mounts, nuts and bolts. Refer to Engine Mount Strut Replacement - Left and Engine Mount Strut Replacement - Right
in Engine Mechanical - 3.4L.
23.
Rotate the engine forward to gain access to the brake booster removal. Refer to Rotating the Engine for Service Access in Engine Mechanical -
3.4L.
24.
Remove the brake booster.
Installation Procedure
Caution:
When replacing the power booster brake, make sure that the cruise control cable is not routed between the booster and the cowl. If the cable is
damaged or pinched, it must be replaced. Failure to do this could result in personal injury.
1.
Position the brake booster to the cowl and the mounting plate.
