Montana V6-3.4L VIN E (2002)
14. Clean the oil pan and the engine block gasket surface.
Installation Procedure
Important: Use the J 39505 in order to install the engine right side oil pan side bolts.
1. Install the oil pan gasket and the oil pan.
2. Install the engine mount bracket with the engine mount to the oil pan.
3. Install the transaxle brace to the oil pan.
4. Install the starter motor.
5. Install the oil level sensor electrical connector.
6. Install frame assembly.
7. Connect the catalytic converter pipe to the engine right side exhaust manifold.
8. Install the A/C compressor.
9. Lower the vehicle.
10. Remove the engine support fixture.
11. Install the engine mount struts to the engine.
12. Fill the engine with oil.
13. Connect the battery ground (negative) cable.