Montana V6-3.4L VIN E (2002)
groove.
Important: The inner tie rod boot (3) must not be twisted, puckered or out of shape in any way. If the inner tie rod boot (3) is not shaped properly,
adjust the inner tie rod boot (3) by hand before installing the boot clamp.
6. Install the inner tie rod boot (3) onto the inner tie rod assembly (2).
7. Using the J 22610 install the inner tie rod boot clamp (1) on the inner tie rod boot (2) by firmly crimping the inner tie rod boot clamp (1).
8. Install the inner tie rod small boot clamp (2).
9. Install the inner tie rod jam nut (2) to the inner tie rod assembly (1).
