Montana V6-3.4L VIN E (2002)
Compressor/Pump: Service and Repair
Automatic Level Control Air Compressor Head Replacement
Automatic Level Control Air Compressor Head Replacement
Removal Procedure
1. Remove the automatic level control air compressor from the vehicle.
2. Remove the air dryer from the automatic level control air compressor.
3. Remove the wiring terminals B and C from the automatic level control air compressor electrical connector.
4. Remove the bolts/screws from the automatic level control air compressor head (2).
5. Remove the automatic level control air compressor head.
6. Remove the O-ring (3) from the automatic level control air compressor.
Installation Procedure
1. Route the wires through the tie strap and the conduit.
2. Install the O-ring (3) to the automatic level control air compressor.