Montana V6-3.4L VIN E (2002)
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the manual 2-1 band servo cover bolts (103).
^
Tighten the bolts (103) to 25 Nm (18 ft. lbs.).
5. Install the accumulator (132).
6. Install the lube oil pipe (130) into the case at the lube hole for the front differential carrier internal gear.
7. Use a flat-bladed tool in order to lock the lube oil pipe retainer (129) into the case.
8. Install the accumulator bolts (131).
^
Tighten the bolts (131) to 12 Nm (106 inch lbs.).
9. If removed, install a new filter seal.
10. Install the filter.
11. Install the oil pan.
12. Lower the vehicle.
