Montana V6-3.4L VIN E (2002)
12.
Remove the wheel speed sensor harness connector (2).
13.
Remove the left lower ball joint from the left steering knuckle.
14.
Disconnect the left drive axle from the transaxle.
15.
Reposition and secure the drive axle.
16.
Remove the heat shield bolts from the frame (2).
17.
Remove the steering gear-to-frame bolts (2).
18.
Support the left side of the frame with a utility stand.
19.
Remove the transaxle mount lower nuts only.
20.
Loosen the engine mount lower nuts.
21.
Remove the air deflector.
22.
Remove the left side frame bolts.
23.
Use the utility stand in order to lower left side of the frame.
24.
Position the drain pan under the transaxle.
25.
Remove the left axle.
26.
Remove the utility stand and lower the vehicle.
27.
Loosen the motor support bolts.
28.
Raise the vehicle.
29.
Remove the motor mount bracket.