Montana V6-3.4L VIN E (2002)
Windshield Washer Hose: Service and Repair
Hose Replacement - Rear Window - Washer Pump to End Gate
REMOVAL PROCEDURE
1. Remove the right cowl trim panel.
2. Remove the right lower pillar garnish molding.
3. Remove the right rear lower quarter trim panel.
4. Remove the litigate trim panel.
5. Remove the wiper module cover.
6. Disconnect the rear washer hose from the rear washer pump.
7. Disconnect the rear washer hose from the washer solvent container.
8. Using a small flat-bladed tool, remove the rear washer nozzle (2).
9. Disconnect the rear washer hose (1) from the rear washer nozzle (2).
10. Pull the rear washer hose end out through the rear liftgate conduit.