Montana AWD V6-3.4L VIN E (2004)
Front Bumper Cover / Fascia: Service and Repair
Fascia Support Replacement - Front Bumper (Pontiac)
Fascia Support Replacement - Front Bumper (Pontiac)
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
1. Remove the front bumper fascia. Refer to Fascia Replacement - Front Bumper (Pontiac) (See: Fascia Replacement - Front Bumper (Pontiac)
)Fascia Replacement - Front Bumper (Chevrolet).
2. Use the J 38778 in order to remove the push-in retainers from the front bumper fascia lower support.
3. Remove the front bumper fascia lower support from the front impact bar.
Installation Procedure
1. Install the front bumper fascia lower support to the front impact bar.
2. Install the push-in retainers to the front bumper fascia lower support.
3. Install the front bumper fascia. Refer to Fascia Replacement - Front Bumper (Pontiac) (See: Fascia Replacement - Front Bumper (Pontiac))Fascia
Replacement - Front Bumper (Chevrolet).