Montana AWD V6-3.4L VIN E (2004)
7. With the aid of an assistant, use the suction cups in order to lift the liftgate window (2) from the opening.
Installation Procedure
1. Install the stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows (See: Windows and
Glass/Windows/Service and Repair/Urethane Adhesive Installation of Stationary Windows) .
2. Reconnect the rear window defogger connector.
3. Install the wiper motor. Refer to Wiper Motor Replacement - Rear in Wipers/Washer Systems.
4. Install the liftgate trim panel. Refer to Trim Panel Replacement - Liftgate (See: Trunk / Liftgate Interior Trim Panel/Service and Repair) in
Interior Trim.
5. Close the liftgate.
6. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
