Montana AWD V6-3.4L VIN E (2004)
*
Dimension (a) is 41 mm (1.614 in)
*
Dimension (b) is 60 mm (2.362 in)
8. For the MONTANA THUNDER emblem/nameplate install to the following dimensions:
*
Dimension (A) 70 mm (2.75 in)
*
Dimension (B) 30 mm (1.18 in)
*
Dimension (C) 195 mm (7.67 in)
*
Dimension (D) 95 mm (3.74 in)
9. Heat the mounting surface to approximately 27-41°C (80-105°F) using the J 25070 , if necessary.
10. Ensure that the temperature of the emblem/nameplate is approximately 29-32°C (85-90°F).
Important: Do not touch the adhesive backing on the emblem/nameplate.
11. Remove the protective liner from the back of the emblem/nameplate.
12. Position the emblem/nameplate to the location marks and press the emblem/nameplate to the mounting surface.
13. Apply equal pressure along the emblem/nameplate to uniformly bond the item to the mounting surface.
14. Remove the protective tape from the mounting surface.
